Name: JC10 Diffused Silicon Pressure Transmitter
Brand: Nanjing Jiucheng technology Co., Ltd
SKU: JC10
Price: 79.00 USD
Availability: InStock

Introduction

JC10 is an industrial measuring instrument that is modular in design and meets global OEM standards. The series is stable and reliable, and has excellent cost performance. It is rugged and durable to meet the requirements of more stringent industrial standards. It is widely used in industrial support, industry support and equipment support. The series includes a variety of options, which are applied to different industries and different working conditions. It solves the needs for economic pressure monitoring in different occasions and serves a wide range of industries.
JC10 series diffused silicon pressure transmitter adopts silicon piezoresistive oil-filled core. The internal dedicated digital integrated circuit converts the sensor millivolt signal into standard voltage and current signals (such as 4~20Ma, 0~5VDC, 0.5~4.5VDC) etc. It can be connected to the computer through the acquisition card or directly connected to the control instrument, smart meter, PLC, etc. I2C digital signal, only need battery DC 3.3~5V power supply, power consumption can be as low as 10uA, can meet the lower power consumption pressure measurement of various wireless instruments. The series has the characteristics of small size, light weight, convenient and simple installation, all stainless steel sealing structure, can work in corrosive environment, and has very good anti-vibration and impact resistance.

Features

* Measuring range：0~20KPa…60MPa
* Diffused silicon sensitive components, strong anti-interference, long-term stability
* 316L stainless steel isolation corrugated diaphragm for measuring gases, liquids, gas-liquid mixtures, etc
* Multiple industrial signal output: 4~20mA、DC 0~5V、DC 1~5V ,DC 0.5~4.5V、I2C。
* Accuracy 0.5% FS(typical) for industry standards
* Compact structure, standardized process production, stable and reliable quality, cost-effective
* With standard anti-damping design, can resist 300% instantaneous impact

Application

* Machine made
* Equipment matching
* Measurement and control technology
* Pump and compressor
* Hydraulic and pneumatic fields

JC10 Diffused Silicon Pressure Transmitter

Selection Code S-pulse Buffer Media Status and Application

Application
Cavitation, liquid hammer, and peak pressure may occur in the hydraulic system, such as when the value is quickly closed or the pump is turned on and off. Such problems may occur at the inlet and outlet ends, even if the operating pressure is extremely low.

Media Status
The inclusion of particulate matter in the liquid may cause nozzle clogging. Mounting the sensor in a vertical position minimizes the risk of nozzle clogging, as the nozzle can only contact the liquid after the inactive volume of the nozzle orifice is filled with liquid at startup. The influence of the viscosity of the medium on the response time is very small. Even if the viscosity is as high as 100cSt, the response time will not exceed 5ms.

Performance Parameter

Measuring Range	0~20KPa…60MPa
Overload Capability	1.5~2 times full-scale pressure (with damping can resist 300% instantaneous impact)
Burst Pressure	4xFS (≤100MPa)
Durability	﹥1×10⁷cycle（P:10~90%FS）
Pressure Type	Gauge / Absolute
Measuring medium	Gas or liquid compatible with 316 stainless steel
Response time	≤4ms
Resolution	0.01%FS
Accuracy (linear,hysteresis, repeatability)	Typical：±0.5%FS	Maximum：±1%FS
Long-term stability	Typical：±0.2%FS/Year	Maximum：±0.3%FS/Year
Zero temperature drift	Typical：±0.02%FS/℃	Maximum：±0.04%FS/℃
Sensitivity temperature drift	Typical：±0.02%FS/℃	Maximum：±0.04%FS/℃

Environmental Conditions

Medium Temperature	-20～85℃
Ambient Temperature	-20～85℃
Compensation Temperature	-10～60℃
Vibration resistance	20g IEC 60068-2-6
Impact resistance	500g/1ms IEC 60068-2-27
EMC-launch	EN61000-6-3
EMC-anti-interference	EN61000-6-2
Insulation resistance	﹥100MΩ 500V AC-1min
Shell Protection	Plug type(IP65）； Cable type(IP67） Compliance IEC 60529 standard
Certification	CE

Electrical Specifications

Code	Standard signal (with short circuit protection)	Supply voltage with polarity protection	Power supply- Current	Load（R）	Output Impendence
A1	4~20mA	DC 9~30V	Max.25mA	R≤(U-9)/0.02Ω
V1	1~5V DC	DC 9~30V	8mA	R≥50kΩ	<2kΩ
V2	0~5 V DC	DC 9~30V	8mA	R≥50kΩ	<2kΩ
V3	0.5~4.5V DC	DC 9~30V	8mA	R≥50kΩ	<2kΩ
V4	0.5~4.5V DC	DC 5±0.25V	8mA	R≥50kΩ	<2kΩ
S3	I2C	DC 3.3~5V	10μA

Material

Interface and housing	Stainless Steel 304L
O-ring	Fluororubber
Sensor Diaphragm	Stainless Steel 316L
Weight	Approx.150g

JC10	G	010B	A1	F2	W2	S
Model	Pressure type	Pressure Range	Output	Mounting thread	Electrical connections	Buffer
	G=Gauge A=Absolute	020K =20KPa G 035K =35KPa G 070K=70KPa G 001B=1bar G/A 002B=2bar G/A 004B=4bar G/A 006B=6bar G/A 010B=10bar G/A 016B=16bar G/A 025B=25bar G/A 040B=40bar G/A 060B=60bar G 100B=100bar G 160B=160bar G 250B=250bar G 400B=400bar G 600B=600bar G	A1=4~20mA V1=1~5V V2=0~5V V3=0.5~4.5V V4=0.5~4.5V/5V S3=I2C	F1=M20x1.5 male F2=G1/4 male F3=1/4NPT F0=Customize	W1=Straight Out 1m W2=A type HSM plug W3=M12 corner out 1m W4=M12 Straight Out 1m	S=With buffer Default is without buffer T=Special

Model example: JC10G010BA1F2W2S
(JC10 Diffused Silicon Pressure Transmitter; Range 0~1MPa Gauge; Output 4~20mA; Accuracy 0.5% typical; Power Supply 9~30VDC;Pressure Connection G1/4 male thread; Electrical Connection Hessman plug; with instantaneous buffer, Special instruction: 010B=10bar G/A, G/A stands for gauge and absolute pressure, G gauge, A absolute)
Remarks: It can be customized if the order quantity exceeds a certain amount. Please contact the sales engineers for details.