Name: JC-CW01 Diffused Silicon High Pressure Sensor
Brand: Nanjing Jiucheng technology Co., Ltd
SKU: JCCW01
Price: 18.70 USD
Availability: InStock

Introduction

JC-CW01 diffused silicon high pressure sensor is the core component of producing high-pressure sensor and pressure transmitter. As a high-pressure and high-performance pressure sensitive component, it can be easily amplified and assembled into a standard signal output. The diffusion silicon pressure sensitive chip is packaged in a 316L stainless steel casing, the applied pressure passes through the stainless steel diaphragm, the sensitive chip does not directly contact the measured medium, and the internally sealed silicone oil is transferred to the sensitive chip, so the product can be applied to various harsh media occasions.

Features

* Constant current, constant voltage excitation optional
* High reliability pressure chip
* Wide temperature compensation
* Can be normalized output
* Compensation board moisture-proof protection
* Φ19mm standard OEM
* 316L material
* High performance, all solid state, high reliability

Application

* Industrial Process Control
* Level measurement
* Refrigeration equipment and HVAC control
* Pressure measuring instrument, pressure calibration instrument
* Aviation navigation test
* Hydraulic system and valve
* Biomedical instruments
* Hydraulic control system

JC-CW01 Diffused Silicon High Pressure Sensor

Electrical connections / 4-wire lead(4W)

Wire color	Definition
Red	Input+(+IN)
Blue	Input-(-IN)
Yellow	Output+(+OUT)
White	Output-(-OUT)

Electrical performance	Pressure Range	0～80MPa…100MPa
	Pressure Type	Sealed Gauge
	Excitation	Constant current 1.5mA；
	Excitation	Constant Voltage 10V
	Input resistance	Constant current：2kΩ～5kΩ；Constant Voltage：3kΩ～18kΩ
	Electrical connection	Gold-plated pins or silicone flexible wires
	Compensation	Constant current：-10℃～70℃
	temperature	Constant Voltage：-20℃～85℃
	Working Temperature	-40℃～125℃
	Storage Temperature	-40℃～125℃
	Insulation resistance	≥200MΩ/250VDC
	Response time	≤1ms(up to90% FS)
	Measuring medium	liquid and gas compatible with 316 stainless steel
	Mechanical vibration	20g(20～5000HZ)
	Impact	100g(10ms)
	Service life	10×10⁶(cycles)
Structural performance	Diaphragm	316L SS
	Housing	316L SS
	Perfusion liquid	Silicone oil
	Seal ring	Fluororubber

Parameters	Min.	Typical	Max.
Non-Linearity %FS	-0.3	±0.2	0.3
Repeatability %FS	-0.05	±0.03	0.05
Hysteresis %FS	-0.05	±0.03	0.05
Zero Output mV	-2	±1	2
Span Output mV excitation：1.5mA excitation：10VDC	60	90	150
Span Output mV excitation：1.5mA excitation：10VDC	98	100	102
Zero Temperature drift %FS	-1.5	±0.75	1.5
Sensitivity temperature drift %FS	-1.5	±0.75	1.5
Thermal hysteresis %FS	-0.075	±0.05	0.075
Long term Stability %FS	-0.3	±0.2	0.3

JC-CW01 Pressure sensor
Code	Description
JC-CW01	Diffused silicon high Pressure sensor
	Code	Power Supply
	C	Constant Current
	V	Constant Voltage
		Code	Pressure Range
		80M	0~80MPa
		100M	0~100MPa
		XXX	Customized
			Code	Pressure Type
			S	Sealed Gauge
				Code	Wire Lead
				1	Connect Pins
				2	Silicone wire
				XX	Customized

Note:
1. Can be used for down-range, and the amplitude is controlled within ±50%FS.
2. Sealing pressure is absolute pressure when used for gauge pressure, but the benchmark is the pressure at the production site; this series only has sealing pressure.
3. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
4 .The commonly used compensation method for the product is 1.5mA constant current compensation. It is recommended to give priority.
5. Do not force to pull the pins or the leads of sensitive components.
6. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
7. If you have special requirements on product performance parameters and functions, please contact us.