We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Pressure Sensor / Diffusion Silicon Pressure Sensors

JC-CZ16 Oil Filled Sensor

Ø19mm oil filled Diffused silicon
Compensation Temp. -10~70℃
Pressure Range: 0~10MPa….70MPa
  • Range:
  • Power Supply:
    Constant current
(10000 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Dimensions(mm)
  • Technical Parameters
  • Ordering Information
  • Reviews


JC-CZ16 oil filled sensor are based on piezoresistive silicon pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element.
JC-CZ16 series are 0-10Mpa...70MPa high range sealed gauge sensors. It is designed for O-ring mounting for the applications where compatibility with corrosive media is required.
Each sensor was strictly temperature compensated for both zero and span.


* High stability, High accuracy
* Pressure range:0-10MPa…70MPa     
* Wide operable temperature   
* Compatible with corrosive media     
* Standard mounting size 


* Process control 
* Fresh and waste water measurements     
* Medical and food instruments
* Pressure transmitters
JC-CZ16 Oil Filled Sensor

Specifications of current excitation(1.5mA, 25℃)

Parameters Min. Typical Max.
Accuracy(%FS) Non-Linearity1  ≤40KPa   ±0.10 ±0.15
Accuracy(%FS) Non -Linearity1 70MPa   ±0.20 ±0.35
Hysteresis   ±0.05 ±0.10
Repeatibility   ±0.05 ±0.10
Zero2  Output(mV)  -1 ±0.5 1
Span(FS) Output(mV)  180   450
Operation Temp.(℃)3 -40   125
Compensated Temp.(℃) -10   70
Zero Temp.error(%FS)4   ±0.5 ±0.75
Span Temp. error(%FS)4   ±0.75 ±1.0
Thermal hysteresis(%FS)   0.1  
Long term Stability/Zero (±%FS annual)   0.1  
Long term Stability/Span (±%FS annual)   0.1  
Supply Current(mA) 0.5 1.5 2
Input Resistance(KΩ) 3 4.5 6
Output Resistance(KΩ) 3.5 5 6.5
Load Resistance5(MΩ) 5    
Insulation Resistance(100V)6(MΩ) 100    
Pressure Range   0-10MPa…70Mpa
Overpressure ≤40Mpa 2X
70Mpa 100MPa
Media–Pressure   Liquids and Gases compatible with 316L Stainless Steel

1. Best fit straight line.
2. Measured at vacuum for absolute (A), ambient for gage (G). 
3. Maximum temperature range for product with standard cable is -20°C to +105°C. 
4. Over the compensated temperature range with respect to 25°C. 
5. Load resistance to reduce measurement errors due to output loading.
6. Between case and sensing element
JC-CZ16 Pressure sensor
Model Description
JC-CZ16 Diameter 19mm O Ring mounting
  Code Power Supply
C Constant current
  Code Pressure Range
10MPa  0-10MPa
20MPa 0-20MPa
40MPa 0-40MPa
70MPa  0-70MPa
XXX Customized
  Code Pressure type
1 Connect Pins
2 Ribbon Cable(90mm as default)
X Special

1. Can be used for down-range, and the amplitude is controlled within ±50%FS.
2. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
3. The commonly used compensation method for products is 1.5mA constant current compensation.
4. Do not force to pull the pins or the leads of sensitive components.
5. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
6. If you have special requirements on product performance parameters and functions, please contact us.
Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login